Severe-Duty Air Conditioning
and Filtration Equipment
Severe Duty Air Conditioning Severe Duty HVAC Filtration Heavy Duty HVAC Crane Cab Air Conditioning Pulpit HVAC Pressurization Duty HVAC
|
Severe Duty Air Conditioning Severe Duty HVAC Filtration Heavy Duty HVAC Crane Cab Air Conditioning Pulpit HVAC Pressurization Duty HVAC |
|
|
LHDE 1 & 2 TON EVAPORATOR UNIT
The LHDE Evaporator series requires minimum space and is
designed to be compatible with several different Lintern industrial condenser
sections. The system is built to withstand dirt, heat and corrosion found in
industrial environments.
The LHDE 1 Ton offers these unique features and
benefits:
Wide Fin Spacing:
Evaporator coil is 8 fins per inch (3.2mm) compared to 14-22 fins per inch on
commercial units. This allows for maintenance-free operation in dirty
environments.
Corrosion Protection:
Manufactured with a 304 stainless steel frame, inside and out, with epoxy coated
evaporator coil as a standard, for high corrosion resistance in a variety of
industrial environments.
Universal Mounting Configuration:
1 ton can be mounted horizontally or vertically, front or back, for mounting on
an inside ceiling roof, inside wall of an office, or outside wall of an
electrical enclosure.
Refrigerants: Designed
for operation with the following environmentally acceptable refrigerants:
HCFC-124, HFC-134a, HCFC-22.
Capacity: 10,000 BTUH
(2.3kW) Capacity can varies dependent on refrigerant type, condenser selection,
ambient temperature and return air temperature.
Dimensions: 15.00"
[381mm] (W) X 8.185" [207mm] (D) X 26.00" [660mm] (H).
Wide Fin Spacing:
Evaporator coil is 8 fins per inch (3.2mm) compared to 14-22 fins per inch on
commercial units. This allows for maintenance-free operation in dirty
environments.
Corrosion Protection:
Manufactured with a 304 stainless steel frame, inside and out, with epoxy coated
evaporator coil as a standard, for high corrosion resistance in a variety of
industrial environments.
Mounting Configuration:
Vertical mounting on outside wall of an electrical enclosure with refrigerant
connections on right hand side.
Refrigerants: Designed
for operation with the following environmentally acceptable refrigerants:
HCFC-124, HFC-134a, HCFC-22, HFC-407C.
Capacity: 20,000 BTUH
(5.9kW) Capacity can varies dependent on refrigerant type, condenser selection,
ambient temperature and return air temperature. Dimensions: 16.50" [419mm] (W) X 13.18" [335mm] (D) X 40.13" [1019mm] (H).
For more information about this
product or any other products, please contact the factory for a complete
brochure. |
|
Send mail to
solutions@lintern.com with
questions or comments about this web site.
|
