|
about.htm
lintern_quality.htm
products.htm
Compressors.htm
what's_new.htm
Sales Reps.htm
Load Questionnaire.htm
| | LHDE
Evaporator 1 Ton & 2 Ton
The LHDE Evaporator series requires minimum space and
is designed to be compatible with several different Lintern industrial
condenser sections. The system is built to withstand dirt, heat and
corrosion found in industrial environments.
Recommended for use in applications in any hot, dirty
and corrosive plant installation. They are sturdy, compact and
lightweight. Ideal for stationary or mobile applications, as well as
electrical enclosures, or industrial office cooling as a ductless/mini
split solution.
The LHDE 1 Ton offers these unique features and benefits:
-
Wide Fin Spacing: Evaporator
coil is 8 fins per inch (3.2mm) compared to 14-22 fins per inch on
commercial units. This allows for maintenance-free operation in
dirty environments.
-
Corrosion Protection:
Manufactured with a 304 stainless steel frame, inside and out, with
epoxy coated evaporator coil as a standard, for high corrosion
resistance in a variety of industrial environments.
-
Universal Mounting Configuration:
1 ton can be mounted horizontally or vertically, front or back,
for mounting on an inside ceiling roof, inside wall of an office, or
outside wall of an electrical enclosure.
-
Refrigerants: Designed for
operation with the following environmentally acceptable
refrigerants: HCFC-124, HFC-134a, HCFC-22.
-
Capacity: 10,000 BTUH (2.3kW)
Capacity can varies dependent on refrigerant type, condenser
selection, ambient temperature and return air temperature.
-
Dimensions: 15.00" [381mm] (W) X
8.185" [207mm] (D) X 26.00" [660mm] (H).
The LHDE 2 ton offers these unique features and benefits:
-
Wide Fin Spacing: Evaporator
coil is 8 fins per inch (3.2mm) compared to 14-22 fins per inch on
commercial units. This allows for maintenance-free operation in
dirty environments.
-
Corrosion Protection:
Manufactured with a 304 stainless steel frame, inside and out, with
epoxy coated evaporator coil as a standard, for high corrosion
resistance in a variety of industrial environments.
-
Mounting Configuration:
Vertical mounting on outside wall of an electrical
enclosure with refrigerant connections on left hand side or right
hand side.
-
Refrigerants: Designed for
operation with the following environmentally acceptable
refrigerants: HCFC-124, HFC-134a, HCFC-22, HFC-407C.
-
Capacity:
20,000 BTUH (5.9kW)
Capacity can varies dependent on refrigerant type, condenser
selection, ambient temperature and return air temperature.
-
Dimensions:
16.50" [419mm] (W) X 13.18" [335mm] (D) X 40.13" [1019mm] (H).
|
